Getting your Nokia 5110 LCD up and running on an Arduino

Nokia 5110 LCD

We purchased one of these very cheap, very cool 84×84 LCD backlit screens off of eBay a couple of weeks ago.

It’s a very nice product for adding visual elements to your projects at a very low price. We paid £3.89 for the screen and it was delivered a few days later.

Take a look below for connection instructions and example code from Adafruit on how to get this up and running with your Arduino.

So What do I need?

LCD Specifications

  • Controller: PCD8544
  • Supply: 2.7V to 3.3V
  • Interface levels: 2.7V to 5V
  • Backlight Colour: Blue
  • Backlight supply: 3.3V Max
  • Module size: W 43.6mm x H 43.1mm
  • Working current: < 200uA (Backlight off)

Notice that the module only needs 3.3v from the Arduino. More information can be found on the Datasheet located here.

Download the above libraries and rename the dash ( – ) to an underscore ( _ ) in the folder names so that the Arduino IDE can load the library correctly; you’ll know if you haven’t done this as the IDE will show a popup message saying it can’t load the library.

Once you have done that; you’re all ready to hook up the LCD to the Arduino, we used a small cheap breadboard for this task as the LCD module came with male pins already attached. As we are using the Adafruit example to get you up and running connect the Pins as follows, example code to come:

Nokia 5110 LCD

That should be everything you need to connect up. The BL is the back light for the LCD module and it is a optional connection.

Read more: Getting your Nokia 5110 LCD up and running on an Arduino

Leave a Comment

Your email address will not be published. Required fields are marked *