This project is used to measure the distance using ultrasonic sensors. The ultrasonic signal passes through the atmosphere to a barrier, which we want to measure the distance. Part of this signal is reflected and travels back to the receiver. The time delay between sending and receiving signals are then determined by distance barriers. The device was designed […]
Ultrasonic range finder using ATMega8515 Read More »
So far we have seen various devices that are talking, such us cars, dolls etc.This project is also like one of them. you can use it in various projects such us IVS, robots etc. There are various voice recording IC’s. They have different recording time and sampling frequency. Most of the IC’s can record less than 1min
ISD4004 based voice recorder using atmega Read More »
Here’ s an melody player with Atmega16. Read more: Digital Melody player using atmega16 microcontroller
Digital Melody player using atmega16 microcontroller Read More »
This projects gives you a simple wav player with help of the MMC card connected to ATmega32. You can use any AVR microcontroller. The MMC card works on 3.3v so a 3.3v regulator is used and the 5v to 3.3v level conversion is done by the combination of resistors. The LF33CV is used for the 3.3v regualtor. The code is written for 1GB card and
MMC card based WAV player using atmega32 Read More »
This Instructable will be about designing a music player from using various building blocks. You will understand the communication between the microcontroller, memory, computer, LCD display, RTC, IR remote, and the music file decoder. I will try my best to to teach you in a way so that you can design your own projects using the
Music Playing Alarm Clock using Microcontroller AT90USB1286 Using Atmega Read More »
This is a fun speaker timer I made for some upcoming conferences. It uses a 4-digit charlieplexed LED (pseudo 7-segment) display and is driven by a AVR ATMega328 or an Arduino. It allows a default time to be set, can be paused, and will put out 5 Volts on several IO lines when 10, 5, 1, and
Fun Hackable Speaker Timer using ATMega328 microcontroller Read More »
Here’s how to add lights, sound and action to your favorite Halloween project using the open source Arduino microcontroller. Arduino is easy to learn to use and it opens up a whole new world for costume builders and creature creators. If you want to learn how to connect wires, servos, LEDs and use sound effects to add that something special
Lets start off by saying that I am a noob to micro controllers like Arduino. After looking through instructables for a while I saw the things that arduino could do. That is when I realized that I had to get one and learn the whole process of programming. So having said that I will now
Singing Pumpkins/ Arduino using microcontroller Using Atmega Read More »
This Instructable will be about designing a music player from using various building blocks. You will understand the communication between the microcontroller, memory, computer, LCD display, RTC, IR remote, and the music file decoder. I will try my best to to teach you in a way so that you can design your own projects using
Music Playing Alarm Clock using ATmega644 microcontroller Read More »
Use an attiny13a, two LEDs and a greeting card speaker to create a blinking Marioman that plays the Super Mario Brothers theme song. This can be an easy low-cost project for anyone who is looking for a fun way to break into AVR programming! The notes of the songs are generated by a square wave
Blinking, Singing, Marioman using Attiny microcontrollers Read More »
