Many times we are faced with a heat containing coffee and don’t know if the fluid is at the proper temperature and it is impossible to know just by looking at the bottle ended up losing time with a coffee that is cold and we get upset about it.
This however indicates maker by a graph LEDs if the liquid is hot, warm or cold. The LEDs gradually connect the blue (cold) to red (hot), when there is a heating and go off when there is a cooling.
Step 2: Sensor
The temperature sensor was removed from the tip of the digital thermometer and connected to the Arduino as shown below:
The sensor was placed inside the glass bottle with a long wire.
I developed a code that was based on another that controls the LED graphics that was modified and adapted to the needs of the project. In this program you can also see the serial port of the Arduino IDE value read by the sensor and the number of LEDs that are off.
Read more: Smart Thermal + Arduino