Project Gado is an initiative which aims to create an open-source archival scanning robot which small archives can purchase for $500 and use to autonomously scan their photographic collections.
Wex detects your location with ultrasonic sensors then follows you with his one flashing eye. His red “heartbeat” can be seen through his mouth. Step 1: Parts needed include: Arduino Two ping ultrasonic sensors Futaba s3103 servo Radio Shack 276-0016 7 color led Radio Shack 276-036 flashing red led 9 volt battery 480 ohm resistor …
Let’s make a simple inverted balancing robot, and operate it. You need only half a day to do them, if you have an arduino and some materials. [a video of a robot you would make] introduction: After a few work with arduino, I have thought of making an inverted pendulum. Then I had two policies for the project. simple …
A Simple and Very Easy Inverted Pendulum Balancing Robot Using Arduino Read More »
I have been spending the last few months doing research into biologically inspired robotic structures. While my approach may seem formalistic in nature, these devices were simply a means for ultimately conducting social research. This desire stems from my experience building Simple Bots, and their subsequent display at multiple Maker Faires. While displaying these robots, I …
3D-Printed Biologically-Inspired Robotics Using Arduino Read More »
The world’s first completely open-source Bitcoin ATM for Education and Experimentation. http://openbitcoinatm.org for more information. Step 1: Fabricate Box and Faceplate Out of a piece of 12″x12″ aluminum sheet metal, cut two rectangles and drill six rivet holes and four holes to attach the bill acceptor. Cut aluminum angle into two 11 1/2″ lengths. For each …
Obstacle avoiding vehicle, continue in “3D Laser Range Finder” series ( project 1, project 2). The basic idea is the same, measuring distance using red laser pointers, CCD analog camera and Arduino UNO. Modification was made in geometry. Two lasers were set for “far field” obstacle detection, few meters in front of vehicle on left or right …
Bobble-heads!!! Every sports fan loves em, but they’re kind of boring, just sitting frozen on your shelf I thought it might be fun to create an Automatic Bobble-head Bobbler something that can wake that old bobble-head up and get him nodding away. I finally found time to get one working just in time to be a Christmas present …
Build the Remote Control Bobble-head Bobbler! using arduino Read More »
Hello Friends! Well, as you know, in September the new premiere shield of Arduino, Arduino YUN. This little friend has a Linux embedded system with which we can run anything you can think of (at least so far). While there is very little information on this new board, with departure in the guide that provides …
Control Access of Arduino YÚN with MySQL, PHP5 and Python Read More »
The PhytoBot is a semi-intelligent plant which responds to external stimulus (light intensity and light location) and responds to it as a phototropic plant would. Essentially it is designed as a piece of interactive artwork for operation over a long period of time. The motivation driving this was triggered by the lack of understanding & …
Augmenting Plant Behavior Through Robotics using Arduino Read More »
So after 5 previous versions that had various flaws, I now have an Arduino robot that actually works and although basic is very cheap – although there a probably a few more flaws so please point them out to me but this is a good start on how to make your own robot. In order to catch up, please see my previous …
Obstacle avoidance Arduino robot – build your own larryBot Read More »
