MKR1000 With Windows 10 Using Arduino

Hello everyone.

First I want to say that this project is for the world’s largest Arduino maker challenge.

Please respect and share.

Step 1: Connect the mkr1000 with your computer

Step 2: Download the mkr1000 board library

tools –> board –> boarde manager –> and type ” MKR1000″

and download the library.

Step 3:  Download the wifi library

sketch –> include library –> library manager –> type “wifi101”

P.S this is the library for the billed in wifi module.

Step 4: Open the attached code.

Step5: The modification for the wifi connection

1. Uncomment the marked sentence

2. Change “your_network_name” with you wifi name. (be careful for the capitals)

3. This step is optional

Uncomment the last line creating a stable IP address for the MKR1000.

4. Choice your security mode

In my case it was a WPA / WPA2

Change “your_Wpa_passphrase” with your wifi password.

5. Upload the code to the MKR1000.

Step 6: open windows 10 store

Step 7: Right click on the search box

Step 8: Type ” windows remote Arduino ”

Step 9: Download it (I already download it so I will just open it)

Step 10: Chose the communication type

Step 11: We are going to use in this project the wifi (network)

Step 12: Type the MKR1000 ip address

Step 13: And the port that is in the Arduino code

Step 14: and then click “connect”

Step 15: Remote your MKR1000 using wifi connection.

Read more: MKR1000 with Windows 10