MKR1000 to ThingSpeak.com Using Arduino

/*
This sketch is a combination of ADAFruits DHT sketch, WiFi101 Webclient
and The arduino example from ThingSpeak
Modified by Stephen Borsay for the MKR1000, feel free to use
 */

#include <SPI.h> //you don't need this as we arn't using the shiled just chip
#include <WiFi101.h>
#include "DHT.h"

#define DHTPIN 1    // what pin we're connected to, pin1 is 5th pin from end

// Uncomment whatever DHT sensor type you're using!
#define DHTTYPE DHT11  // DHT 11
//#define DHTTYPE DHT21  // DHT 21
//#define DHTTYPE DHT22  // DHT 22

DHT dht(DHTPIN,DHTTYPE);

String apiKey ="YourApiKeyHere"; // api from ThingSpeak

char ssid[] = "YourSSIDHERE"; //  your network SSID (name)
char pass[] = "YourPasswordHere";    //your network password
int keyIndex = 0;     // your network key Index number (needed only for WEP)

//#define WEBSITE "api.thingspeak.com"

int status = WL_IDLE_STATUS;
// if you don't want to use DNS (and reduce your sketch size)
// use the numeric IP instead of the name for the server:
//IPAddress server(74,125,232,128);  // numeric IP for Google (no DNS)
char server[] = "api.thingspeak.com";    // name address for Google (using DNS)

// Initialize the Ethernet client library
// with the IP address and port of the server
// that you want to connect to (port 80 is default for HTTP):
WiFiClient client;

void setup() {
  //Initialize serial and wait for port to open:
  Serial.begin(9600);
  while (!Serial) 
  {
    ; // wait for serial port to connect. Needed for native USB port only
  }

  // check for the presence of the shield:
  if (WiFi.status() == WL_NO_SHIELD) {
    Serial.println("WiFi shield not present");
    // don't continue:
    while (true);
  }

  // attempt to connect to Wifi network:
  while (status != WL_CONNECTED) 
  {
    Serial.print("Attempting to connect to SSID: ");
    Serial.println(ssid);
    //Connect to WPA/WPA2 network.Change this line if using open/WEP network
    status = WiFi.begin(ssid, pass);

    // wait 10 seconds for connection:
    delay(10000);
  }
  
  Serial.println("Connected to wifi");
  printWifiStatus();
  
}