Making art Interactive Using Arduino

making art interactive

Unfortunately, due to my need to reclaim my Arduino and breadboards, we don’t have photographic documentation of our circuit. However, the structure of it was rather self-evident. Although we arranged the circuit in a such a way that we could program other functions, but we ultimately opted to keep the programming to a minimum to enable more of the focus to be placed upon the interaction with the phone, as opposed to the quality and function of the light.

making art interactive

By position two ends of a wire on the handset and switch hook, we managed to both maintain and engage with the structure and function of the phone. Especially given the age of our group, the understanding of phones and their standard order (being on the hook) is very much engrained. We also used the lack of external light in the display space in order to conceptually explore questions of where one’s focus lies when they are either engaging with a telephone of disconnected from it.

The process
We decided to make a small-scale version of our project and used cardboard to resemble the dome-like structure we wanted to recreate. We soldered 10 LEDS to jumper cables to extend the length of our workspace and to have the actual wiring outside of the dome and out of the user’s view, fitting the LEDs into the perforations we’d made on the cardboard.

We based the arrangement of the LEDs on an image of some constellations; which would be acting as the starry sky in the dome. Using a shift register, we based our code on one of the examples from the book and modified it to fit our project, which lights up a different constellation on each [delayed] blink.

A major challenge
We encountered many challenges along the way in the making of our prototype; the main one was figuring out how to solve the touch element of the project. The idea we had for it was to place a pillow with a conductive material (tin foil) underneath to activate the light. When we set out to make it, we couldn’t figure out how to make it work; we attempted to put one of the LEDs’ poles in contact with the tin foil while having the other pole attached to the breadboard. This was taking us too much time, so we decided to move on and concentrate on the rest of the code and the actual wiring.

art interactive circuit

Read more: making art interactive Using Arduino

Leave a Comment

Your email address will not be published. Required fields are marked *