DIY Time Control Machine Using Arduino

This project is about how to make a time machine! This machine looks like a glove, and can “stop” any moving subject. At first, watch a video with some demonstration and experiments, guess how it works, and then read about how to make it =)

This effect looks like better in real life (by naked eye, not through a camera), without black lines. Smooth perfect time stop effectc!! IT IS REAL “OH MY GOD” REACTION!

Step 1: All We Need

Generally this project is about Arduino, high-power LED and some tricky magic with soldering iron. Here is some list with links to AliExpress

• Glove http://ali.pub/1ypcm5
• LED 100W, white http://ali.pub/1ypcoa
• Optics http://ali.pub/1ypda2 http://ali.pub/1ypdc0
• DCDC boost http://ali.pub/1ypda2 http://ali.pub/1ypdfb
• Arduino NANO http://ali.pub/1ypda2
• Accelerometer http://ali.pub/1ypda2
• Potentiometers http://ali.pub/1ypda2
• Lithium battery http://ali.pub/1ypda2
• 10 k and 100 Ohm resistors
• MOSFET. Use one of this: IRF3704ZPBF IRLB8743PBF IRL2203NPBF IRLB8748PBF IRL8113PBF IRL3803PBF IRLB3813PBF IRL3502PBF IRL2505PBF IRF3711PBF IRL3713PBF IRF3709ZPBF AUIRL3705N IRLB3034PBF IRF3711ZPBF

Step 2: Wiring

Step 3: Assembling Power Part

At first connect battery, DCDC and MOSFET. Also you need to tune DCDC to 34 V output voltage.

Step 4: Assembling Logic Part

Connect potentiometer and IMU to Arduino

Step 5: Fixing on Glove

Fix all parts on glove, using cable ties and Velcro strip.

Step 6: LED and Cooling Plate

Fix LED on copper plate, and don’t forget to smear thermal paste between them.