ATTINY13 Atmel microcontroller installed on the circuit model helicopter is checking the voltage of the battery the battery (or battery) voltage circuit when the level set LEDs, buzzer, giving the alam. ATTINY13 PB2, PB1,… Electronics Projects, Battery Alarm Circuit for Model Helicopters ATtiny13 “avr project, microcontroller projects, simple circuit projects, “
ATTINY13 Atmel microcontroller installed on the circuit model helicopter is checking the voltage of the battery the battery (or battery) voltage circuit when the level set LEDs, buzzer, giving the alam. ATTINY13 PB2, PB1, and PB0 pin chassis yaplılarak short circuit between the alarm can be set at a certain voltage circuit has very little material, if prepared pcb printed circuit board with SMD components becomes much smaller.
BATTERY ALARM FOR MODEL HELICOPTERS
In the model aircraft enjoy lithium polymer batteries (abbreviated Li-Po) very popular, but they, unlike their counterparts in mobile phones, cameras or portable media players, no built-in protection circuit. What this means for the user that he must be vigilant in seeing that the sensitive battery during charging and discharging is not damaged.
When you load one need most to worry, there are good chargers specifically for model or the model is the same for a suitable charger. Somewhat more problematic is the discharge – here, you naturally want to take advantage of the battery capacity as possible, on the other hand, should not the battery voltage falls below the permissible limit of 3.0 V per cell.
