This board is a development board on which you can build your projects. It is suited for educational use, experiments or prototyping. The board uses the ATTiny2313 microcontroller with a 20Mhz clock. The board contains the ISP 10-pin connector for in circuit serial programming. It has also a push button reset switch. It has 15 digital I/O ports with 4 PWM output channels.
The I/O pins of the microcontroller are also available on two ML10 connectors for connecting for example the LCD-Interface board. The power can be connected via the DC connector which has a pin of 1.1mm. The power regulator supplies the microcontroller with the 5V DC power it needs.
Read more: ATTiny 2313 BOARD