Animatronic Stargate helmet using Arduino • Tech Projects

I love the movie Stargate and when I first saw it I immediately knew I wanted to make one of the super cool Horus guard helmets. I had sketched multiple designs over the years and figured out several different methods for building it but rejected them all for one reason or another- usually due to cost or complexity of construction. Since I wanted this to be a costume helmet my requirements were that it be light weight, comfortable, have decent outward vision and be reasonably durable. I also wanted it to be buildable by anyone using simple hand tools. Most important of all I wanted it to move in a similar fashion to the movie helmets.

All of this proved to be a pretty tall order but eventually it all came together and now you can make a moving Stargate helmet of your own!

Step 1: Tools and materials

Tools-
Saw for cutting wood/metal- I use a Milwaukee hand saw that accepts reciprocating saw blades- super handy! http://www.homedepot.com/h_d1/N-5yc1v/R-202525764/h_d2/ProductDisplay?langId=-1&storeId=10051&catalogId=10053
Cordless drill w/ various drill bits
X-Acto knife with #11 blades
Scissors- small sharp scissors make cutting the patterns easier
Glue gun
Sandpaper- small piece of 100 grit to smooth wood edges and spackling
Allen wrenches- Inch
Screwdrivers- phillips and flat head
Soldering iron
Ballpoint pen
Bench vise or some other way of securing work while cutting metals
Trusty Instructables multitool- I never leave home without it!

Materials-
Cardstock (2pkgs)- http://shop.hobbylobby.com/store/item.aspx?ItemId=168038
Newspaper
Craft foam sheet (10ea 12″ x 18″)-  http://shop.hobbylobby.com/store/item.aspx?ItemId=160137
White glue
Tacky glue-  http://shop.hobbylobby.com/products/clear-gel-tacky-glue-163972/
Gorilla glue-  http://www.homedepot.com/h_d1/N-5yc1v/R-100141832/h_d2/ProductDisplay?langId=-1&storeId=10051&catalogId=10053
Spray foam-  http://www.homedepot.com/h_d1/N-5yc1v/R-100068117/h_d2/ProductDisplay?langId=-1&storeId=10051&catalogId=10053
Paint- 1 can silver
1 can copper
1 can satin clear coat
Pastels- dark blue, reddish brown, black
Spackling paste- http://www.homedepot.com/h_d1/N-5yc1v/R-202314762/h_d2/ProductDisplay?langId=-1&storeId=10051&catalogId=10053
Plywood- 3/32″ thickness, 6″ x 12″ (3ea)- http://www.micromark.com/Birch-Plywood-3and32-Inch-Thick-x-6-Inches-Wide-x-12-Inches-Long,6909.html
Minwax Polycrylic sealer- http://www.homedepot.com/h_d1/N-5yc1v/R-202061439/h_d2/ProductDisplay?langId=-1&storeId=10051&catalogId=10053
Velcro- http://www.homedepot.com/h_d1/N-5yc1v/R-202261913/h_d2/ProductDisplay?langId=-1&storeId=10051&catalogId=10053
Cotton swabs/ soft brush- for applying pastels

Step 2: Printing patterns

So here we go!

The base of this helmet uses a pepakura folded paper model. If you’re not familiar with pepakura it allows you to take a 3D model and essentially fold it out flat into a paper pattern. The pattern is printed on cardstock and cut out, folded and glued together. It’s a pretty easy way to get a general shape for a physical model. The complexity of the model can vary greatly and it’s always a trick to have the minimum number of folds to reduce complexity but still allows you to have good shape and model detail. I’m using using the pepakura model provided by nintendude and movieman on the RPF forum as a base (a HUGE thank you to you guys!)

So the first thing you want to do is download the provided patterns and open the Horus pattern using the free Pepakura Viewer, which can be downloaded here (sorry Windows only)-http://www.tamasoft.co.jp/pepakura-en/

There are additional files provided should you want to make the Anubis version or want the additional files for the neck collar, staff weapon or ZAT weapon to complete a costume. Note that I have not yet constructed these so I can’t say if the animatronics will fit the Anubis head -but I’m sure there’s a way to make it work. An opening staff weapon and animatronic ZAT are on my project list…

After you have opened the Horus file you will see a wire model on one side of the screen and the patterns on the other side of the screen. The first thing you will notice is that if you click on a particular pattern page it will show you where that part goes in the finished model as well as what other pattern parts it mates to- this is great to back to and use as a reference when assembling the patterns.

At this point what you want to do is turn off the “Set Materials To Faces” button. If you don’t do that all of the pattern faces will print grey.

Next turn on the “Show Edge ID” button. This is a big one- when the patterns print they will have numbered edges that show what edges mate together. Without this it will be very difficult to assemble the patterns.

Now select Setting form the pull down menu and select Print Setting. I set the line thickness to 3, Print lines smoothly, transparency to 50% and Print page number.

Now select the printer icon, select your printer, select All and then OK. A window then appears asking if you if you want to adjust the scale- select NO. The reason for this is that Pepakura Viewer is set up to print on A4 paper and if you scale the model to fit on letter sized paper the patterns will be the wrong size. The down side to this is that if you are printing on letter sized paper some of the patterns can run just barely outside the borders, but it’s no big deal.

So print your patterns onto cardstock and get your scissors ready…

Step 3: Cut, Fold and Glue

Now let’s cut some patterns.

The best thing I’ve used for cutting the cardstock are small, sharp scissors. Only cut out as many patterns in one sitting as you are comfortable working with. This will avoid a lot of confusion and the possibility of lost patterns. Once you’ve got some patterns cut you’ll want to fold on marked lines. Pepakura uses a regular dashed line for mountain folds and dashed/dotted lines for valley folds. Pretty simple really.

The best thing I’ve found for folding lines is a small 6″ long steel ruler. It’s long enough for large areas but small enough for small folds when you use the end of the ruler.

Once you’ve got a few pieces cut and folded glue them together on the numbered mating edges. I use Aleene’s clear gel tacky glue and it works great. Just hold the edges together for a bit until the glue sets and move onto the next edge. Some of the folds are tricky and it can take a bit of fiddling to get pieces to fit together properly!

Step 1: Tools and materials

Step 2: Printing patterns

Step 3: Cut, Fold and Glue

Leave a Comment Cancel Reply