The main aim of this project is to come up with a functional WiFi switch that will help us operate via the “Blynk” app from the Mobile app store. This Instructable is successfully tested with very basic knowledge of Electronics and I would appreciate suggestions from professionals in the domain to comment for appropriate changes. …
Display is the necessary part of any machine whether it is any home appliance or industrial machines. Display not only shows the control options to operate the machine but also shows the status and output of the task performed by that machine. There are many types of displays used in electronics like 7-segment display, 16×2 LCD display, TFT …
Interfacing 16×2 LCD with Atmega16 AVR Microcontroller in 4-Bit Mode Read More »
Ok first of all this was a final project for my microprocessor course in my University, and its intended to clarify and guide to someone has a similar project or just want to do it and learn , since when i was doing this project it wasn’t so easy to find the information and examples …
Car Datta Logger Using OBD II Protocol (atmega 2560+ SD Card + Lcd 16×2) Using Atmeg Read More »
Introduction For our ECE 4760 final project, we implemented an interactive CPR training dummy which can coach the trainees through the CPR process with a LCD to display instructions. The prototype CPR training dummy built is a budget-friendly one that contains a re-programmable Atmel ATmega1284 microcontroller and other hardware components so that it can interact …
ECE 4760 Final Project: CPR Training Dummy on AVR Using Amega Read More »
Data transmission over sound is used in many communication protocols, the most common being Dual-Tone Multi-Frequency signaling (DTMF). It is used to dial phone numbers and the frequency combinations chosen for the digits are very familiar to the general public. It was also used in early modems to request internet connections and its characteristic sound …
