clock

atmega8 mekanik saat

MECHANICAL CLOCK CIRCUIT ATMEGA8

In fact, what lies At the forefront of the digital but mechanics should have been a wonderful project:) is an interesting time in the atmega8 microcontroller time and when the mind comes to the… Electronics Projects, Mechanical Clock Circuit ATmega8 “atmega8 projects, avr project, microcontroller projects, “ In fact, what lies At the forefront of the digital but mechanics …

MECHANICAL CLOCK CIRCUIT ATMEGA8 Read More »

Clone Fixing Error

Firmware Upgrade for USBASP Clone – Fixing Error Setting USBASP ISP Clock Using Atmega

USBASP is one of the most popular programmer for AVR Microcontroller by Thomas Fischl. It is one of the oldest programmer for AVR. And very common being used with AVRdude software. There are many GUI based on AVRDude, such as: embedXcode AVR8 Burn-O-Mat AVRDUDESS BitBurner avrdude-gui khazama eXtreme Burner and many more In this tutorial we focus …

Firmware Upgrade for USBASP Clone – Fixing Error Setting USBASP ISP Clock Using Atmega Read More »

Programmable auto filter interface for C64

Programmable auto filter interface for C64 using Arduino

Overview A software / hardware combo that allows for control of the analog filter inside a Commodore 64 that is running Cynthcart from a host computer (eg, Macbok, PC). Software • 16-step filter sequencer • Set the speed of the filter sequence (with intervals between values reaching 2ms) • Set the length of the sequence from 1 …

Programmable auto filter interface for C64 using Arduino Read More »

Digital Clock

Digital Clock Using Microcontroller (AT89S52 Without RTC Circuit) Using Atmega

Lets describe a clock… “Clock is a device that counts and shows time(relative)”!!!                           Guess I said it right so lets make a CLOCK with ALARM feature. NOTE: it will take 2-3 minutes in reading please read the whole project or else I will not be responsible for …

Digital Clock Using Microcontroller (AT89S52 Without RTC Circuit) Using Atmega Read More »

ATtiny at 16MHz without an external clock

Easily run your ATtiny at 16MHz, without an external clock, from the Arduino IDE

Hardware components: Atmel ATTiny85 ×1  SparkFun Tiny AVR Programmer ×1 Software apps and online services: Arduino IDE STORY Introduction The Atmel tinyAVR MCU’s (ATtiny) are a series of chips optimized for applications requiring performance and/or power efficiency in a small package. These have internal clocks that runs at 8 MHz. They can also be clocked at 16 MHz and 20MHz using …

Easily run your ATtiny at 16MHz, without an external clock, from the Arduino IDE Read More »