Yesterday I was going to start watching a movie, when me and my friend pedro decided to give up on the movie and build a binary clock. After sometime thinking on how to program it, we made it. It works beautifully, so I decided to show here how I’ve done. It may not be the easiest way …
Hello everyone! This is my first instructable. This project is a 3D printed clock powered by a stepper motor and is controlled by an Arduino Uno. It was designed in OnShape over the course of a month. It keeps time very precisely and only needs to be plugged into a USB port once programmed. Credit …
As hard as it might be to believe, I had never built an electronic clock of any kind. I’ve always thought electronic clocks were passe and not worth the time to design and build one. In addition, I thought that all interesting electronic clocks designs had already been built so why bother building an also …
A fun, simple LED clock, that will give you the time to the nearest half hour using single-color LEDs. Parts needed are as follows: Arduino Nano 400 tie-point Breadboard Ribbon Cable DS1307 RTC IC 32.768 kHz Crystal (12) 10mm LEDs (12) 180 Ohm resistors (2) 10k Ohm resistors 0.1″ spaced, 12 wire ribbon cable, 7″ …
Features Arduino 328 Microprocessor is used to decode and display Time & date from the DCF77 “Atomic” Clock in Mainflingen near Frankfurt Germany The DCF77 signal is decoded using the fantastic new DCF77 library written by Udo Klein meaning the clock stays in sync and keeps perfect even with a massive amount of noise on the received DCF77 signal …
At long last I have managed to finish the Rainbow Word Clock! Once again, this one was inspired by Doug and his creations http://www.instructables.com/id/The-Wordclock-Grew-Up/ I have a fixation with RGB LED’s at the moment and I wanted to do something a little different. So, while it is still here (before my girlfriend nicks it!) I thought …
I have my online classes going on (still -_-) and the problem is I have a hard time waking up early. So I end up missing my first class every day. And yes, I do keep an alarm for 7 am but I always turn it off and go back to bed. So I got …
Stubborn Alarm – Doesn’t Stop Until You Brush Your Teeth Using Arduino Read More »
Clock with Tics is an Arduino-powered 24-hour digital clock that displays expletives at random intervals. A clock ‘ticks’. A ‘tic’ (note the different spelling) can be a mental disorder and can manifest itself in a number of ways; most seriously, someone suffering from “Tourette’s Syndrome” will blurt out swearwords involuntarily. I had thought of titling this piece “Time …
Clock with Tics (presentation prototype) using Arduino Read More »
This instructable will show you how to make your own arduino based watch that tells time using a matrix of LEDs. This is my first instructable, so if something is unclear leave me a comment or send a message! I was inspired by all the cool LED watches that I saw on this website: http://www.tokyoflash.com/en/watches/1/ …
An interesting project of making a Digital Clock using Arduino UNO without the help of RTC Module. Description AIM To build a Digital Clock at Low Cost (Without using any External RTC Module) ject, I have used LCD 16X2 Display , an Arduino UNO , a 4×4 keypad and Arduino UNO v5.0 Shield to proceed …
Digital Clock using Arduino UNO Without RTC module Read More »
