This application step (step) motor control, input and output ports through 8051 will examine the circuit by providing lift. We use our stepper motor circuit. As we know, certain steps of the stepper motor,… Electronics Projects, 8051 Elevator Project Stepper Motor Control “avr project, microcontroller projects, “
This application step (step) motor control, input and output ports through 8051 will examine the circuit by providing lift.
We use our stepper motor circuit. As we know, certain steps of the stepper motor, moving the appropriate signals are sent to the windings of a motor coach that is brought to the desired position. About this circuit about 3 ° ~ 15.3 ° with a step angle of a stepper motor is used. And our program assigns the value 10 to the tour and variable speed of about 315 ° rotation of the engine have achieved.
Stepper motors are available in the market as we know it ended the 4.5.6. We are in our circuit, we used 6-pin stepper motor. Therefore, we gave two ends to +12 volt supply. Our circuit is typically used to drive the stepper motor circuit, we used all the ULN2003. Thus, when applied to input logical “1”, all the circuits from the output of “0” is received and the motor is driven.
8051 ELEVATOR SCHEMATIC
8051 Elevator Project Stepper Motor Control keil Read more: 8051 ELEVATOR PROJECT STEPPER MOTOR CONTROL proteus isis simulation file: 8051-elevator-project-stepper-motor-control.rar
Alternative File Download LINK list (in TXT format): LINKS-2918.zip