Practical Guide to Implementing Solar Panel MPPT Algorithms


Using a solar panel or an array of panels without a controller that can perform Maximum Power Point
Tracking (MPPT) will often result in wasted power, which ultimately results in the need to install more
panels for the same power requirement. For smaller/cheaper devices that have the battery
connected directly to the panel, this will also result in premature battery failure or capacity loss, due to the
lack of a proper end-of-charge procedure and higher voltage. In the short term, not using an MPPT controller
will result in a higher installation cost and, in time, the costs will escalate due to eventual equipment failure.
Even with a proper charge controller, the prospect of having to pay 30-50% more up front for additional solar panels makes the MPPT controller very attractive
Practical Guide to Implementing Solar Panel MPPT AlgorithmsSOLAR PANEL MPPT
The main problem solved by the MPPT algorithms is to automatically find the panel operating voltage that
allows maximum power output. In a larger system, connecting a single MPPT controller to multiple panels
will yield good results, but, in the case of partial
shading, the combined power output graph will have multiple peaks and valleys (local maxima). This will
confuse most MPPT algorithms and make them track incorrectly. Some techniques to solve problems related
to partial shading have been proposed, but they either need to use additional equipment (like extra monitoring
cells, extra switches and current sensors for sweeping panel current), or complicated models based on the
panel characteristics (panel array dependent).

Leave a Comment

Your email address will not be published. Required fields are marked *