I just brought a new lamp and after a week, I’m tired of looking at it randomly change colours between red, blue, green. What can you expect from a cheap lamp brought at 5$ . Looking at the lamp I realized that I could make a Gmail lamp, that shines green every time I got a unread mail.
But after some time I changed my idea, and started working on a simple hack. The hack is relatively simple, we can use an Bluetooth device to communicate with my lamp and make it glow which colour I like. And further to the upgrade the lamp just doesn’t glow red, blue, green but also an addition of a few other colours. The additional colours is a mixture of the three primary colours. And at the end of the day I was happy with my lamp and it looked quite cool controlled with my android mobile phone.
Step 1: Parts
Major Components in Project
Lets start with getting all the required parts
Time to disassemble the lamp, after disassembling I found this tiny board with three leds. I de-soldered all wires going to the board and started soldering wires across the leds and connected all the cathodes of all the leds together as seen in the circuit. If you have a RBG led you could go with that instead of three leds. Follow the circuit and you would have a lamp ready to be powered.
Step 3: Colours
Time to set the colours you like, you could stay with standard red, blue, green. Here is a simple list to get the colour you prefer.
Read more: Arduino (Optic Fibre)