3D Color LED Graphics Display using ATmega32 microcontroller

3D Color LED Graphics

This 3-dimensional graphics display system which named as MaJaTron consists of 125 RGB LEDs arranged in a cube of 5x5x5 dimension. Each LED is a multicolor Red, Green and Blue LED and the control circuit of the system can individually control the intensity of each color, thereby, creating a full color, graphics system. Each LED is independently controllable. To control these 125 LEDs, a control circuit consisting of 13 AVR Microcontrollers ATMega32 is used.

3D Color LED Graphics

Each ATMega32 controls 10 LEDs. All the microcontrollers are networked together in a pseudo-RS232 network. This network gets the pixel color and intensity information from a PC. The Mega32s are programmed to operate at a rate of 230400 bps, thereby providing a frame update rate of more than 30 frames per second. This 3D Led Animation project is inspired from Cubatron.

The PC runs a custom graphics creation and simulation software, which any user can use to create, simulate and then download the graphics/animation onto the MaJaTron network of LEDs. This 3D Led Animation project is designed by Dhananjay Gadre, Rishabh Maheshwari, & Deepansh Agrawal

For more detail:  3D Color LED Graphics Display using ATmega32 microcontroller

Leave a Comment

Your email address will not be published. Required fields are marked *