We are in the joy of making a project that has been in our mind for a long time and sharing with you. Smart Coffee Table. Because this table is really smart. It illuminates your environment according to the weight of your drink.
Step 1: Summary
We are in the joy of making a project that has been in our mind for a long time and sharing with you. Smart Coffee Table. Because this table is really smart. It illuminates your environment according to the weight of your drink.
How Does? We have used a weight sensor on the smart coffee table. Thanks to this sensor, we can adjust the desired color to the desired weight to the RGB strip led that we have connected to the Arduino outputs.
If the cup is empty, the red color is lit.
Between 0-50 gr, the yellow color is lit.
Between 50-100 gr, the green color is lit.
Between 100-150 gr, the blue color is lit.
150 and higher, close to white color.
And we used epoxy again in this project. Thus, the lights from RGB are better spread to the environment.
Step 2: Equipment & Materials
If you decided to make this project or you are wondering, have to have some materials and equipments.
We used 4 groups in this project ;
– Elektronics
– 3D Printed Parts,
– Epoxy Resin
– Others
Step 3: Electronics
You will find below list:
– Arduino Nano
– HX711 Weight Sensor
– RGB Led Strip
– BD135 ( * 3)
– 10K (* 3)
– On – Off Switch
Step 4: 3D Printed Parts
You will find list below;
– Main Body
– Cup Holder
– Battery Case
– Shoes (* 8)
– Cup Holder Support
Step 5: Epoxy Resin
We used epoxy resin in this project for good spreading.
