The Zynq 7000 family based on the All Programmable SoC architecture are processor-center platforms that offer software, hardware and I/O programmability in a single chip.
iWave Systems which has released several Altera based FPGA system on modules has just announced its SODIMM (Small Outline Dual In-Line Memory Module) form-factor Xilinx Zynq based module known as the iWave’s iW-RainboW-G28M. The iW-RainboW-G28M features the Xilinx Zynq 7000 series SOC with Dual Cortex A9 CPU @ 866MHz, 85K FPGA logic cells, and up to 125 FPGA IOs.
The iWave iW-RainboW-G28M is compatible with the Zynq Z-7007S, Z-7014S, Z-7010, and Z-7020 SoC. Equipped with an onboard 512 Mbytes of NAND Flash, 512Mbytes of DDR3 SDRAM, Gigabit Ethernet, USB 2.0 ports, an optional Micro SD slot, and an optional WIFI/Bluetooth module with a form-factor of 67.6 mm x 37 mm plug-in SODIMM style. It supports -40 to 85oC temperatures and powered through the SOM edge connector with a 3.3 DC Volt.
The following are the SOM specifications:
- SoC –
- Xilinx Zyng 7000 SoC
- Single/Dual Cortex A9 @ up to 866MHz
- Up to 85K logic cells
- SoC Compatibility –
- Compatible with Z-7007S, Z-7014S, Z-7010, and Z-7020
- Memory –
- 512 MB DDR3 and expandable to 1GB
- 512 MB NAND Flash
- An Optional QSPI Flash
- Optional Micro SD Slot/eMMC (Optional)
- Zynq PS & PL Interfaces –
- Gigabit Ethernet x1 Port
- USB 2.0 OTG x 1 Port
- SD (4bit) x 1 Port
- Debug UART
- JTAG Port
- 60 LVDS/120 SE FPGA IOs
- SOM Features –
- PMIC with RTC
- Gigabit Ethernet Transceiver
- USB 2.0 Transceiver
- Optional Wi-Fi and Bluetooth Module
Read More: iWave releases first Xilinx Zynq 7000 based SOM Module