Driving a DC motor using PWM with AVR ATmega

This library is an update of the software PWM driver you can find here:
For DC motor information please look at the above link.
This update implements also progressive start / stop features using hardware timer.
The PWM frequency have to be selected in the way that the switch frequency is much higher than the dynamics of the motor.
To avoid noise from the motor, the choose PWM frequency is 20Khz.
So, with this one, you can drive up to 4 motors independently controlling:

  • speed
  • direction
  • slow start / stop

Driving a DC motor using PWM with AVR ATmega

Setup parameters are contained in dcmotorpwm. This library was developed on Eclipse, built with avr-gcc on Atmega8 @ 8MHz.
Code https://sourceforge.net/projects/davidegironi/files/avr-lib/avr_lib_dcmotorpwm_02.zip/download 

Leave a Comment

Your email address will not be published. Required fields are marked *