48 Channel Mono / 16 Channel RGB LED Controller using PIC18F2550 microcontroller

16 Channel RGB LED Controller (1)

48 Channel Mono / 16 Channel RGB LED Controller

The 48 Channel Mono/16  Channel RGB LED Controller by Chromation Systems can be used to independantly control 48 groups/channels (up to 120ma per group) of mono-color LEDs or 16 groups/channels of common anode RGB LEDs. It utilizes 3x TLC5940 LED drivers controlled with a PIC 18F2550 microcontroller. The PIC runs at 48mhz, has USB connectivity and controls the drivers through a modified SPI interface. The default firmware uses 8-bit PWM(256 brightness levels) and has a 1.5khz PWM frequency. All LED anodes are connected in parallel and the cathodes are connected to the controller as the outputs sink current. There are 3 connection options for the LEDs, direct soldering, screw down terminal blocks, and headers/housings.

 

16 Channel RGB LED Controller (1)

The primary firmware for this device is ColorMotion compatible, which works with the Chromation Systems ColorMotion Software. ColorMotion is used for creating and uploading RGB patterns to the device.  The source code for ColorMotion Compatible Firmware is not available, but a few variations of sample code, including basic RGB LED control and USB communication is available in the project files below.

There are two primary types of Firmware compatible with different computer software that interfaces with them, the software is used to create a multitude of custom patterns and settings and upload them to the controller for it to run by itself without a computer connection.
Choose From: For RGB LED Control, Chromation Systems ColorMotion Software or for control of Single Color LEDs(regular) Chromation Systems MonoMotion Software can be used.

Using the full version of either MonoMotion or ColorMotion firmware or the either type Demo firmware allows live control of the device over USB via emulated COM(serial) port. Live data can be streamed to the device extremely fast, over 100 frames per second.  Sample Processing code for Live Mode Control can be found on the RGB Demo Software Page.

Visit www.ChromationSystems.com/48channled.html for downloads, updates and more information.

For most of the information please view/download The Datasheet

Read more: 48 Channel Mono / 16 Channel RGB LED Controller using PIC18F2550 microcontroller

Leave a Comment

Your email address will not be published. Required fields are marked *